Inizio

Filtri attivi

    • Non disponibile

    copy of Power Meter Analyzer NaNo5H RTU485

    140,41 €

    Frer NaNo5 with 3 standard CTs inputs

    • Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
    • Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
    • CT input, to reduce cost and wiring time.
    • Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures
    • Pacchetto
    • Non disponibile

    Kit Creatio A3

    545,50 €
    • Non disponibile

    Power Meter Analyzer NaNo63H RTU485

    144,59 €

    Frer NaNo63H with triple miniature CTs

    • Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
    • Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
    • Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
    • Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures
  • PLC DVP14SS211

    93,80 €

    MPU points: 14 (8DI + 6DO)

    • Max. I/O points: 494 (14 + 480)
    • Program capacity: 8k steps
    • COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
    • High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
    • Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
    • Built-in High-Speed Counters 
  • Raspberry PI power I/O

    76,00 €

    Creatio PI I/O complete device for Raspberry PI

    • Large number of functionalities
    • Allows to use Raspberry PI 3 and 3 B+ in industrial environments and domotics applications.
    • Designed to assemble in a small place with Raspberry PI and to be inserted into Italtronic DIN rail serie 10.0012225.RMB height 22.5 mm box, or, 10.0052450.RMB height 45mm.
  • LG01-N LoRa Gateway

    65,00 €

    Open source singolo canale LoRa Gateway.

    • Consente di collegare la rete wireless LoRa a una rete IP tramite WiFi, Ethernet, 3G o 4G cellulare.
    • LoRa wireless consente agli utenti di inviare dati e raggiungere distanze estremamente lunghe a velocità di trasmissione dati basse.
    • Fornisce una comunicazione a spettro esteso a raggio ultra-lungo e un'elevata immunità alle interferenze.
    • Non disponibile

    Power Meter Analyzer NaNo125H RTU485

    152,85 €

    Frer NaNo63H with triple miniature CTs

    • Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
    • Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
    • Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
    • Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures
    • Non disponibile

    PLC DVP12SE11

    214,40 €

    MPU points: 14 (8DI + 6DO)

    • Max. I/O points: 494 (14 + 480)
    • Program capacity: 8k steps
    • COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
    • High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
    • Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
    • Built-in High-Speed Counters 
    • Non disponibile

    LG02 LoRa Gateway

    67,69 €

    Open source doppio canale LoRa Gateway.

    • Consente di collegare la rete wireless LoRa a una rete IP tramite WiFi, Ethernet, 3G o 4G cellulare.
    • LoRa wireless consente agli utenti di inviare dati e raggiungere distanze estremamente lunghe a velocità di trasmissione dati basse.
    • Fornisce una comunicazione a spettro esteso a raggio ultra-lungo e un'elevata immunità alle interferenze.
  • Creatio LoRaSensor TH 1.2

    59,90 €

    LoraSensor ST environmental long range LoRa Sensor

    • Progettato per essere utilizzato nel settore privato e industriale e misura temperatura, umidità e pressione atmosferica
    • Batteria 1xAA Alimentazione al litio che garantisce una lunga durata, una facile sostituzione e una trasmissione sicura dei dati.
    • Scatola con facile montaggio a parete, in ambiente domestico, industriale e pubblico, con un design elegante.
    • La trasmissione dei dati e la gestione dei sensori è affidata a Dragino LoraST
  • Power Meter Analyzer NaNo5H RTU485

    122,23 €

    Frer NaNo5 with 3 standard CTs inputs

    • Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
    • Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
    • CT input, to reduce cost and wiring time.
    • Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures
    • Non disponibile

    DVP08SP11R Digital I/O Expansion

    56,28 €

    Digital I/O Expansion

    • 4 Digital inputs 24Vdc
    • 4 Single Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC
  • LoRaST IoT Module

    19,00 €

    LoRaST IoT module featuring LoRa® technology 

    • piccolo modulo ricetrasmettitore wireless
    • offre un mix molto di lungo raggio, basso consumo energetico e trasmissione sicura dei dati.
    • Progettato per consentire agli sviluppatori di implementare rapidamente soluzioni LoRa e IoT a livello industriale.
    • Aiuta gli utenti a trasformare l'idea in un'applicazione pratica e trasformare Internet of Things in realtà.
    • È facile programmare, creare e connettere le tue cose ovunque.
    • Connettore E-Key in formato M2
    • Non disponibile

    Power Meter C70QTL005M 3-TA MID Certified RTU485

    174,20 €

    FRER C70QTL005MCAD 6A three phase 4 wire energy counter

    • For 1 or 5A CT
    • Programmable CT ratio
    • Fully bi-directional four quadrants measurements for all energies and powers
    • For 4 wire
    • RS485 RTU Port
    • Class B according to EN 50470-3
    • Tariff input
    • 2 S0 outputs for energy pulse emission
    • LCD display with 8 main digits
    • Optical port for communication with external modules
    • Available with MID certification
  • DVP16SP11R Digital I/O Expansion

    64,31 €

    Digital I/O Expansion

    • 8 Digital inputs 24Vdc
    • 8 Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC
  • LoRa/GPS Shield for Arduino

    34,00 €

    LoRa GPS Shield per Arduino

    • Scheda di espansione di LoRa ™ / GPS per l'uso con Arduino.
    • Soluzione rapida per chi è interessato a sviluppare soluzioni LoRa ™ / GPS.
    • Non disponibile

    Power Meter C70QTL005E 3-TA MID Certified Ethernet

    288,10 €

    FRER C70QTL005MCAD 6A three phase 4 wire energy counter

    • For 1 or 5A CT
    • Programmable CT ratio
    • Fully bi-directional four quadrants measurements for all energies and powers
    • For 4 wire
    • Ethernet 10/100 Port
    • Class B according to EN 50470-3
    • Tariff input
    • 2 S0 outputs for energy pulse emission
    • LCD display with 8 main digits
    • Optical port for communication with external modules
    • Available with MID certification
  • DVP01AD-S 4 Analog Inputs

    147,40 €

    Analog Expansion

    • Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
    • Analog input channel 4 channel/each module
    • Analog input range ±10V ±20mA
    • Digital conversion range ±8,000 ±4,000
    • Resolution 14 bits (1LSB=1.25mV) 13 bits (1LSB=5µA)
    • Input impedance > 200K 250
    • Overall accuracy ±0.5% of full scale of 25°C (77°F). ±1% of full scale during 0 ~ 55°C (32 ~ 131°F)
    • Response time 3ms × channels
  • Split-core Measuring CT TAA031

    60,30 €

    Frer Split-core Measuring CT TAA031 series

    • 32x21 windows cable pass thruogh
    • from 100A up to 400A

    SUPPLIED ACCESSORIES:

    • busbar fixing
    • Insulated protective caps for busbar mounting
    • C.T. fixing wall mounting fixing feet
  • DVP01DA-S 4 Analog Outputs

    147,40 €

    Analog Expansion

    • Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
    • Analog output channel 4 channel/each module
    • Analog ouput range 0..10V 0..20mA
    • Digital conversion range 4,000
    • Resolution 12 bits (1LSB=2.5mV) 13 bits (1LSB=5µA)
    • Response time 3ms × channels
    • Max. output current 20mA (1K ~ 2M)
    • Non disponibile

    LoRa Shield for Arduino

    21,00 €

    LoRa Shield per Arduino

    • Scheda di espansione di LoRa ™ da utilizzare con Arduino.
    • Soluzione rapida per chi è interessato a sviluppare soluzioni LoRa ™.
  • Split-core Measuring CT TAA081

    87,10 €

    Frer Split-core Measuring CT TAA081 series

    • 50x81 windows cable pass thruogh
    • from 250A up to 1000A

    SUPPLIED ACCESSORIES:

    • busbar fixing
    • Insulated protective caps for busbar mounting
    • C.T. fixing wall mounting fixing feet
  • DVP01PT-S 4 Pt1000 Pt100 Inputs

    147,40 €

    Pt100 and Pt1000 Celsius (°C) Fahrenheit (°F) analog module

    • DVP04PT-S is able to receive 4 points of platinum temperature sensors and convert them into 16-bit digital signals.
    • FROM/TO instructions in DVP Slim series MPU program, the data in DVP04PT-S can be read and written.
    • There are many 16-bit control registers (CR) in DVP04PT-S. The power unit is separate from it and is small in size and easy to install.
  • LoRa/GPS Hat for Raspberry PI

    29,67 €

    LoRa GPS HAT

    • Modulo di espansione per LoRaWan e GPS per l'utilizzo con Raspberry Pi
    • Soluzioni veloci per lo sviluppo di soluzioni LoRaWAN.
    • Non disponibile

    DVP01TC-S 4 thermocouple Inputs

    147,40 €

    Thermocouple Celsius (°C) Fahrenheit (°F) analog module

    • receive 4 points of external thermocouple temperature sensors and convert them into 14-point digital signals.
    • FROM/TO instructions in DVP Slim series MPU program, the data in the module can be read and written.
    • There are many 16-bit control registers (CR) in DVP04TC-S.
    • The power unit is separate from it and is small in size and easy to install.