- Non disponibile
LoRa Shield for Arduino
LoRa Shield per Arduino
- Scheda di espansione di LoRa ™ da utilizzare con Arduino.
- Soluzione rapida per chi è interessato a sviluppare soluzioni LoRa ™.
Política de devolución (editar con el módulo Información de seguridad y confianza para el cliente)
LoRa Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
LoRa Shield is based on Semtech SX1276/SX1278 chip, it targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
Using Hope RF’s patented LoRaTM modulation technique the Dragino Shield featuring LoRa® technology can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.
These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The Dragino Shield featuring LoRa® technology deliver exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than competing devices
LoRa Shield is based on Semtech SX1276/SX1278 chip, it targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
Using Hope RF’s patented LoRaTM modulation technique the Dragino Shield featuring LoRa® technology can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.
These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The Dragino Shield featuring LoRa® technology deliver exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than competing devices.
Features
- Compatible with 3.3v or 5v I/O Arduino Board.
- Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in factory)
- Low power consumption
- Compatible with Arduino Leonardo, Uno, Mega, DUE
- External Antenna via I-Pex connector
Caratteristiche
- Massimo budget di collegamento di 168 dB.
- +20 dBm - Uscita RF costante di 100 mW vs.
- PA ad alta efficienza +14 dBm.
- Bit rate programmabile fino a 300 kbps.
- Alta sensibilità: fino a -148 dBm.
- Front-end a prova di proiettile: IIP3 = -12,5 dBm.
- Eccellente immunità ai blocchi.
- Corrente RX bassa di 10,3 mA, ritenzione del registro 200 nA.
- Sintetizzatore completamente integrato con una risoluzione di 61 Hz.
- Modulazione FSK, GFSK, MSK, GMSK, LoRaTM e OOK.
- Sincronizzatore di bit incorporato per il recupero dell'orologio.
- Rilevazione del preambolo.
- Dynamic Range di 127 dB RSSI.
- Sensore RF automatico e CAD con AFC ultraveloce.
- Motore a pacchetti fino a 256 byte con CRC.
- Sensore di temperatura integrato e indicatore di batteria scarica.