Sensors

3,6V 2.6Ah battery (Li-SOCl2) AA for Creatio LoraSensor THL & CO2

• Spare part battery for Creatio sensors models Creatio LoRaSensor THL and CO2.
• Enhanced capacity
• High voltage response, stable during most of the lifetime of the application
• Wide operating temperature range (-60°C/+85°C)
• Low self-discharge rate (less than 1 % after 1 year of storage at +20°C)
• Easy integration into compact systems
• Superior resistance to atmospheric corrosion

3,6V 2.6Ah battery (Li-SOCl2) AA for Creatio LoraSensor THL & CO2

• Spare part battery for Creatio sensors models Creatio LoRaSensor THL and CO2.
• Enhanced capacity
• High voltage response, stable during most of the lifetime of the application
• Wide operating temperature range (-60°C/+85°C)
• Low self-discharge rate (less than 1 % after 1 year of storage at +20°C)
• Easy integration into compact systems
• Superior resistance to atmospheric corrosion

LoraSensor TH environmental long range LoRa Sensor

• Projected to be used in private and industrial sector and measures atmospheric pressure, temperature and humidity
• 1xAA battery Lithium or Alcaline power that ensures long duration, easy replacement and secure transmision of data.
• Box with easy wall mounting, in domestic, industrial and public environment, with elegant design.
• Data transmission and management of sensors is entrusted to Dragino LoraST

• The LSD03A is more robust and resistant to outdoor use.
• It has a Li-SOCI2 8500 mAh battery.
• It has the function of open alarm and you can set this option to know if the door has been open in a certain time.

• LMDS200 can measure two distances: the closest object and the next object behind the closest one.
• It uses a 24 Ghz microwave radar to detect the distance between the sensor and different objects.
• Reliable in environments with condensation or dust. It can detect the correct distance even if there is water or dust on the sensor.

• Built-in temperature and humidity sensor.
• It has a USB Type-C sensor connector to connect to external sensors.
• Compatible with the LoRaWAN protocol and can work with any Gateway.
• External sensors are sold separately.

• Rain Gauge is a weather monitoring instrument to measure rainfall.
• Use a tipping bucket to detect rain
• Vents below the funnel, avoid leaves or other things that impede the flow of rain

• WSS-02 RS485 wind speed and wind direction monitor for weather station solution.

• WSS-03 is a RS485 Air Quality sensor.
• It can monitor CO2, PM2.5 and PM10 at the same time.

• It can monitor Rain or Snow event.
• Has auto heating feature, this ensures measurement more reliable.

• WSS-05 is a 4 in 1 RS485 sensor which can monitor Temperature, Humidity, Illuminance and Pressure at the same time.

• Sensor can be used to measure the total solar radiation in the spectral range of 0.3 to 3 μm (300 to 3000 nm).
• The core device of the radiation sensor is a high-precision photosensitive element.

• WSS-07 sensor is mainly used to measure the photosynthetically active radiation of natural light in the wavelength range of 400-700nm.
• WSS-07 use precision optical detectors and has an optical flter of 400-700nm

• It can work with any standard LoRaWAN Gateway.
• Includes a built-in temperature and humidity sensor.
• It has an external temperature sensor if necessary.

• The Dragino LDDS75 is used to measure the distance between the sensor and a flat object
• It is a module that uses ultrasonic technology to measure distances.
• It can be used in different situations such as silos of food products, proximity of objects, etc...