Subcategories
Active filters
- Availability: In stock
-
PLC DVP14SS211
€113.50MPU points: 14 (8DI + 6DO)
- Max. I/O points: 494 (14 + 480)
- Program capacity: 8k steps
- COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
- High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
- Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
- Built-in High-Speed Counters
-
Raspberry PI power I/O
€91.96Creatio PI I/O complete device for Raspberry PI
- Large number of functionalities
- Allows to use Raspberry PI 3 and 3 B+ in industrial environments and domotics applications.
- Designed to assemble in a small place with Raspberry PI and to be inserted into Italtronic DIN rail serie 10.0012225.RMB height 22.5 mm box, or, 10.0052450.RMB height 45mm.
-
LG01-N LoRa Gateway
€78.65Open source single channel LoRa Gateway.
- It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
- The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
- It provides ultra-long range spread spectrum communication and high interference immunity.
-
Creatio LoRaSensor TH 1.2
€72.48LoraSensor TH environmental long range LoRa Sensor
- Projected to be used in private and industrial sector and measures atmospheric pressure, temperature and humidity
- 1xAA battery Lithium or Alcaline power that ensures long duration, easy replacement and secure transmision of data.
- Box with easy wall mounting, in domestic, industrial and public environment, with elegant design.
- Data transmission and management of sensors is entrusted to Dragino LoraST
-
Power Meter Analyzer NaNo5H RTU485
€147.90Frer NaNo5 with 3 standard CTs inputs
- Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
- Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
- CT input, to reduce cost and wiring time.
- Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures
-
LoRaST IoT Module
€22.99LoRaST IoT module featuring LoRa® technology
- small wireless transceiver module
- offers a very compelling mix of long range, low power consumption and secure data transmission.
- Designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions.
- Help users to turn the idea into a practical application and make the Internet of Things a reality.
- It is easy to program, create and connect your things everywhere.
- M2 format E-Key connector
-
DVP16SP11R Digital I/O Expansion
€77.82Digital I/O Expansion
- 8 Digital inputs 24Vdc
- 8 Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC
-
DVP01AD-S 4 Analog Inputs
€178.35Analog Expansion
- Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
- Analog input channel 4 channel/each module
- Analog input range ±10V ±20mA
- Digital conversion range ±8,000 ±4,000
- Resolution 14 bits (1LSB=1.25mV) 13 bits (1LSB=5µA)
- Input impedance > 200K 250
- Overall accuracy ±0.5% of full scale of 25°C (77°F). ±1% of full scale during 0 ~ 55°C (32 ~ 131°F)
- Response time 3ms × channels
-
Split-core Measuring CT TAA031
€72.96Frer Split-core Measuring CT TAA031 series
- 32x21 windows cable pass thruogh
- from 100A up to 400A
SUPPLIED ACCESSORIES:
- busbar fixing
- Insulated protective caps for busbar mounting
- C.T. fixing wall mounting fixing feet
-
DVP01DA-S 4 Analog Outputs
€178.35Analog Expansion
- Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
- Analog output channel 4 channel/each module
- Analog ouput range 0..10V 0..20mA
- Digital conversion range 4,000
- Resolution 12 bits (1LSB=2.5mV) 13 bits (1LSB=5µA)
- Response time 3ms × channels
- Max. output current 20mA (1K ~ 2M)
-
Split-core Measuring CT TAA081
€105.39Frer Split-core Measuring CT TAA081 series
- 50x81 windows cable pass thruogh
- from 250A up to 1000A
SUPPLIED ACCESSORIES:
- busbar fixing
- Insulated protective caps for busbar mounting
- C.T. fixing wall mounting fixing feet
-
DVP04PT-S 4 PT1000 PT100 Inputs
€178.35Pt100 and Pt1000 Celsius (°C) Fahrenheit (°F) analog module
- DVP04PT-S is able to receive 4 points of platinum temperature sensors and convert them into 16-bit digital signals.
- FROM/TO instructions in DVP Slim series MPU program, the data in DVP04PT-S can be read and written.
- There are many 16-bit control registers (CR) in DVP04PT-S. The power unit is separate from it and is small in size and easy to install.
-
Power Supply 85-264Vac/24VDc 2A
€22.93Highlights & Features
- Universal AC input voltage without power de-rating
- Industrial and ITE safety approvals
- Rugged and compact design (Vibration 5G, Shock 30G)
- Capable of multiple wire connections to terminals
- Wide operating temperature range -20°C to 70°C
- Overvoltage / Overcurrent / Over Temperature / Short Circuit Protections
-
LoRa GPS Tracker LGT-92
€54.45Dragino LoRaWAN GPS Tracker with 9-axis accelerometer
- Open source GPS tracker base on Ultra Low Power STM32L072 MCU and SX1276/1278 LoRa Module.
- Includes a low power GPS module L70 and 9-axis accelerometer for motion and attitude detection.
- Power for both of the GPS module and accelerometer can be controlled by MCU to achieve the best energy profile for different applications.
-
Battery 3.6 V (Li-SOCl2) AA-Size
€6.413,6V 2.6Ah battery (Li-SOCl2) AA for Creatio LoraSensor THL & CO2
- Spare part battery for Creatio sensors models Creatio LoRaSensor THL and CO2.
- Enhanced capacity
- High voltage response, stable during most of the lifetime of the application
- Wide operating temperature range (-60°C/+85°C)
- Low self-discharge rate (less than 1 % after 1 year of storage at +20°C)
- Easy integration into compact systems
- Superior resistance to atmospheric corrosion
-
LSE01 LoRaWAN Soil Moisture & EC Sensor
€141.57The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture.
It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
-
LT-22222-L LoRa I/O Controller
€61.71The Dragino LT series I/O Modules are Long Range LoRa I/O Controller.
It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and digital output etc.
-
RS485-LN RS485 / Modbus to LoRaWAN Converter
€60.98The Dragino RS485-LN is a RS485 to LoRaWAN Converter.
It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.
-
BLG-AN-040 Glass Fiber Outdoor Antenna
€36.30868 ~ 915Mhz Glass Fiber antenna designed for LoRa / LoRaWAN application.
-
LSN50v2 Waterproof Long Range Wireless Sensor...
€63.16LSN50 LoRa Sensor Node is a Long Range LoRa Sensor Node.
It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.
-
LDDS75 LoRaWAN Distance Detection Sensor
€91.48- The Dragino LDDS75 is used to measure the distance between the sensor and a flat object
- It is a module that uses ultrasonic technology to measure distances.
- It can be used in different situations such as silos of food products, proximity of objects, etc...
-
LDDS20 LoRaWAN Non Contact Liquid Level Sensor
€84.94The Dragino LDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution.
It uses non contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
-
LSN50v2-S31 LoRaWAN Temperature & Humidity Sensor
€74.05LoRaWAN Temperature & Humidity Sensor
- It is a sensor that is used to measure temperature and humidity with high precision.
- It has a selection of alarm for temperature and humidity from the value assigned to transmit the alarm.
- the sensor used is a sensirion SHT31 that is calibrated linearized, etc. With which it provides high precision and stability over time.
-
BCN01 Bluetooth BLE iBeacon
€18.88Bluetooth BLE iBeacon
The BCN01 is a Bluetooth BLE iBeacon designed for indoor positioning solution and has very low power consumption.
-
LWL02 LoRaWAN Water Leak
€26.14- The Dragino LWL02 is a LoRaWAN water sensor.
- When there is water between the two metal probes, LWL02 indicates a water leak event.
- LWL02 sends data periodically every day.
-
LoRaWAN Door Sensor LDS02
€26.14- The Dragino LDS02 is a door sensor.
- Detects the open/closed door status.
- The user can see the status of the door, the opening time.