Beginning

Frer NaNo5 with 3 standard CTs inputs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

Frer NaNo63H with triple miniature CTs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

MPU points: 14 (8DI + 6DO)

• Max. I/O points: 494 (14 + 480)
• Program capacity: 8k steps
• COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
• High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
• Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
• Built-in High-Speed Counters 

Open source single channel LoRa Gateway.

• It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
• The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
• It provides ultra-long range spread spectrum communication and high interference immunity.

Frer NaNo63H with triple miniature CTs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

MPU points: 14 (8DI + 6DO)

• Max. I/O points: 494 (14 + 480)
• Program capacity: 8k steps
• COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
• High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
• Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
• Built-in High-Speed Counters 

D'Alessandro Termomeccanica biomass boiler inverter from 20 to 100 Kw.

It substitutes inverters Bonfiglioli.

Digital I/O Expansion

• 4 Digital inputs 24Vdc
• 4 Single Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC

FRER C70QTL005MCAD 6A three phase 4 wire energy counter

LoRa GPS Shield for Arduino

• Expansion board of LoRa™/GPS for use with the Arduino.
• Fast kit solution for those interested in developing LoRa™/GPS solutions.

FRER C70QTL005MCAD 6A three phase 4 wire energy counter

Frer Split-core Measuring CT TAA031 series

• 32x21 windows cable pass thruogh
• from 100A up to 400A

SUPPLIED ACCESSORIES:

• busbar fixing
• Insulated protective caps for busbar mounting
• C.T. fixing wall mounting fixing feet

LoRa Shield for Arduino

• Expansion board of LoRa™ for use with the Arduino.
• Fast kit solution for those interested in developing LoRa™ solutions.

Frer Split-core Measuring CT TAA081 series

• 50x81 windows cable pass thruogh
• from 250A up to 1000A

SUPPLIED ACCESSORIES:

• busbar fixing
• Insulated protective caps for busbar mounting
• C.T. fixing wall mounting fixing feet

LoRa GPS HAT

• Expansion module for LoRaWan and GPS for use with the Raspberry Pi
• Fast solutions for  developing LoRaWAN solutions.

Thermocouple Celsius (°C) Fahrenheit (°F) analog module

• receive 4 points of external thermocouple temperature sensors and convert them into 14-point digital signals.
• FROM/TO instructions in DVP Slim series MPU program, the data in the module can be read and written.
• There are many 16-bit control registers (CR) in DVP04TC-S.
• The power unit is separate from it and is small in size and easy to install.

Open source single channel LoRa Gateway.

• It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
• The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
• It provides ultra-long range spread spectrum communication and high interference immunity.
• 14 pins connector for digital/analog I/O.

Specifications

• 4.3”(480*272) 65,536 Colors TFT
• Cortex-A8 800MHz CPU
• 512 MB RAM 256 MB ROM
• Built-in Ethernet
• 1 COM port / 1 extension COM port
• Multilingual input
• USB Hos , USB Client
• CE / UL certified
• Operating Temperature: -20°C ~ 60°C

Dragino LoRaWAN GPS Tracker with 9-axis accelerometer

• Open source GPS tracker base on Ultra Low Power STM32L072 MCU and SX1276/1278 LoRa Module.
• Includes a low power GPS module L70 and 9-axis accelerometer for motion and attitude detection.
• Power for both of the GPS module and accelerometer can be controlled by MCU to achieve the best energy profile for different applications.

QE-ETH485 is a multiclient bridge Modbus RTU to Modbus TCP

• 24Vdc-Ac power supply
• 17,5mm module for DIN rail mounting
• Ethernet 10Base-T / 100Base-T
• Isolated between Serial RS485, Power Supply and Ethernet
• T-BUS connection for fast installation without wiring
• Up to 10 client connections
• Web Server configuration

3,6V 2.6Ah battery (Li-SOCl2) AA for Creatio LoraSensor THL & CO2

• Spare part battery for Creatio sensors models Creatio LoRaSensor THL and CO2.
• Enhanced capacity
• High voltage response, stable during most of the lifetime of the application
• Wide operating temperature range (-60°C/+85°C)
• Low self-discharge rate (less than 1 % after 1 year of storage at +20°C)
• Easy integration into compact systems
• Superior resistance to atmospheric corrosion

Open source LoRa  Gateway fully compatible with LoRaWAN protocol

• It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
• The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
• 8 Channels fully compatible with LoRaWAN protocol.