Beginning

Open source single channel LoRa Gateway.

• It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
• The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
• It provides ultra-long range spread spectrum communication and high interference immunity.

LoRaST IoT module featuring LoRa® technology 

• small wireless transceiver module
• offers a very compelling mix of long range, low power consumption and secure data transmission.
• Designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions.
• Help users to turn the idea into a practical application and make the Internet of Things a reality.
• It is easy to program, create and connect your things everywhere. 
• M2 format E-Key connector

LoRa GPS Shield for Arduino

• Expansion board of LoRa™/GPS for use with the Arduino.
• Fast kit solution for those interested in developing LoRa™/GPS solutions.

LoRa Shield for Arduino

• Expansion board of LoRa™ for use with the Arduino.
• Fast kit solution for those interested in developing LoRa™ solutions.

LoRa GPS HAT

• Expansion module for LoRaWan and GPS for use with the Raspberry Pi
• Fast solutions for  developing LoRaWAN solutions.

Open source single channel LoRa Gateway.

• It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
• The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
• It provides ultra-long range spread spectrum communication and high interference immunity.
• 14 pins connector for digital/analog I/O.

Dragino LoRaWAN GPS Tracker with 9-axis accelerometer

• Open source GPS tracker base on Ultra Low Power STM32L072 MCU and SX1276/1278 LoRa Module.
• Includes a low power GPS module L70 and 9-axis accelerometer for motion and attitude detection.
• Power for both of the GPS module and accelerometer can be controlled by MCU to achieve the best energy profile for different applications.

3,6V 2.6Ah battery (Li-SOCl2) AA for Creatio LoraSensor THL & CO2

• Spare part battery for Creatio sensors models Creatio LoRaSensor THL and CO2.
• Enhanced capacity
• High voltage response, stable during most of the lifetime of the application
• Wide operating temperature range (-60°C/+85°C)
• Low self-discharge rate (less than 1 % after 1 year of storage at +20°C)
• Easy integration into compact systems
• Superior resistance to atmospheric corrosion

3,6V 2.6Ah battery (Li-SOCl2) AA for Creatio LoraSensor THL & CO2

• Spare part battery for Creatio sensors models Creatio LoRaSensor THL and CO2.
• Enhanced capacity
• High voltage response, stable during most of the lifetime of the application
• Wide operating temperature range (-60°C/+85°C)
• Low self-discharge rate (less than 1 % after 1 year of storage at +20°C)
• Easy integration into compact systems
• Superior resistance to atmospheric corrosion

LoraSensor TH environmental long range LoRa Sensor

• Projected to be used in private and industrial sector and measures atmospheric pressure, temperature and humidity
• 1xAA battery Lithium or Alcaline power that ensures long duration, easy replacement and secure transmision of data.
• Box with easy wall mounting, in domestic, industrial and public environment, with elegant design.
• Data transmission and management of sensors is entrusted to Dragino LoraST

Open source LoRa  Gateway fully compatible with LoRaWAN protocol

• It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
• The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.
• 8 Channels fully compatible with LoRaWAN protocol.

The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture.

It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.

The DLOS8 is an open source outdoor LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.

The Dragino LT series I/O Modules are Long Range LoRa I/O Controller.

It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and digital output etc.

The Dragino RS485-LN is a RS485 to LoRaWAN Converter.

It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.

868 ~ 915Mhz Glass Fiber antenna designed for LoRa / LoRaWAN application.

LSN50 LoRa Sensor Node is a Long Range LoRa Sensor Node.

It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.

• The Dragino LDDS75 is used to measure the distance between the sensor and a flat object
• It is a module that uses ultrasonic technology to measure distances.
• It can be used in different situations such as silos of food products, proximity of objects, etc...

The Dragino LDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution.

It uses non contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server.

RS485/UART to LoRaWAN Converter

• Wireless Alarm and Security Systems
• Automated Meter Reading
• Long range Irrigation Systems, etc.
• Home and Building Automation
• Industrial Monitoring and Control

LoRaWAN Waterproof Temperature Sensor

• The LSNv2-D20 sensor is a chip that can measure temperatures between 55 ° C ~ 125 ° C.
• Domestic Heat Water Systems
• Heating & Cooling Systems
• The cable is made of a silica gel that has a double compression to make it watertight, moisture ...

LoRaWAN Temperature & Humidity Sensor

• It is a sensor that is used to measure temperature and humidity with high precision.
• It has a selection of alarm for temperature and humidity from the value assigned to transmit the alarm.
• the sensor used is a sensirion SHT31 that is calibrated linearized, etc. With which it provides high precision and stability over time.

Bluetooth BLE iBeacon

The BCN01 is a Bluetooth BLE iBeacon designed for indoor positioning solution and has very low power consumption.

• The Dragino LWL02 is a LoRaWAN water sensor.
• When there is water between the two metal probes, LWL02 indicates a water leak event.
• LWL02 sends data periodically every day.

• Dragino LAQ4 is a LoRaWAN air quality sensor for Internet of Things solution. It is designed to measure the surrounding environment parameters include: TVOC(Total Volatile Organic Compound), eCO2(equivalent CO2), Temperature and Relative Air Humidity, and then upload to IoT server via LoRaWAN wireless protocol.
• LAQ4 supports temperature and humidity alarm feature, user can get alarm for instant notice.
• LAQ4 supports Datalog feature, User can retrieve the sensor data from LoRaWAN commands.

• The Dragino LDS02 is a door sensor.
• Detects the open/closed door status.
• The user can see the status of the door, the opening time.

• The Dragino LSNPK01 is a LoRaWAN soil NPK sensor for agricultural IoT.
• It is designed to measure soil fertility nutrient and provide a plant breeding reference.
• The probe is IP68 waterproof and can be buried in the ground for long time use.