Subcategories
Filtri attivi
- Disponibilità: In magazzino
-
PLC DVP14SS211
113,50 €MPU points: 14 (8DI + 6DO)
- Max. I/O points: 494 (14 + 480)
- Program capacity: 8k steps
- COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
- High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
- Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
- Built-in High-Speed Counters
-
Raspberry PI power I/O
91,96 €Creatio PI I/O complete device for Raspberry PI
- Large number of functionalities
- Allows to use Raspberry PI 3 and 3 B+ in industrial environments and domotics applications.
- Designed to assemble in a small place with Raspberry PI and to be inserted into Italtronic DIN rail serie 10.0012225.RMB height 22.5 mm box, or, 10.0052450.RMB height 45mm.
-
LG01-N LoRa Gateway
78,65 €Open source singolo canale LoRa Gateway.
- Consente di collegare la rete wireless LoRa a una rete IP tramite WiFi, Ethernet, 3G o 4G cellulare.
- LoRa wireless consente agli utenti di inviare dati e raggiungere distanze estremamente lunghe a velocità di trasmissione dati basse.
- Fornisce una comunicazione a spettro esteso a raggio ultra-lungo e un'elevata immunità alle interferenze.
-
Creatio LoRaSensor TH 1.2
72,48 €LoraSensor ST environmental long range LoRa Sensor
- Progettato per essere utilizzato nel settore privato e industriale e misura temperatura, umidità e pressione atmosferica
- Batteria 1xAA Alimentazione al litio che garantisce una lunga durata, una facile sostituzione e una trasmissione sicura dei dati.
- Scatola con facile montaggio a parete, in ambiente domestico, industriale e pubblico, con un design elegante.
- La trasmissione dei dati e la gestione dei sensori è affidata a Dragino LoraST
-
Power Meter Analyzer NaNo5H RTU485
147,90 €Frer NaNo5 with 3 standard CTs inputs
- Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
- Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
- CT input, to reduce cost and wiring time.
- Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures
-
LoRaST IoT Module
22,99 €LoRaST IoT module featuring LoRa® technology
- piccolo modulo ricetrasmettitore wireless
- offre un mix molto di lungo raggio, basso consumo energetico e trasmissione sicura dei dati.
- Progettato per consentire agli sviluppatori di implementare rapidamente soluzioni LoRa e IoT a livello industriale.
- Aiuta gli utenti a trasformare l'idea in un'applicazione pratica e trasformare Internet of Things in realtà.
- È facile programmare, creare e connettere le tue cose ovunque.
- Connettore E-Key in formato M2
-
DVP16SP11R Digital I/O Expansion
77,82 €Digital I/O Expansion
- 8 Digital inputs 24Vdc
- 8 Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC
-
DVP01AD-S 4 Analog Inputs
178,35 €Analog Expansion
- Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
- Analog input channel 4 channel/each module
- Analog input range ±10V ±20mA
- Digital conversion range ±8,000 ±4,000
- Resolution 14 bits (1LSB=1.25mV) 13 bits (1LSB=5µA)
- Input impedance > 200K 250
- Overall accuracy ±0.5% of full scale of 25°C (77°F). ±1% of full scale during 0 ~ 55°C (32 ~ 131°F)
- Response time 3ms × channels
-
Split-core Measuring CT TAA031
72,96 €Frer Split-core Measuring CT TAA031 series
- 32x21 windows cable pass thruogh
- from 100A up to 400A
SUPPLIED ACCESSORIES:
- busbar fixing
- Insulated protective caps for busbar mounting
- C.T. fixing wall mounting fixing feet
-
DVP01DA-S 4 Analog Outputs
178,35 €Analog Expansion
- Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
- Analog output channel 4 channel/each module
- Analog ouput range 0..10V 0..20mA
- Digital conversion range 4,000
- Resolution 12 bits (1LSB=2.5mV) 13 bits (1LSB=5µA)
- Response time 3ms × channels
- Max. output current 20mA (1K ~ 2M)
-
Split-core Measuring CT TAA081
105,39 €Frer Split-core Measuring CT TAA081 series
- 50x81 windows cable pass thruogh
- from 250A up to 1000A
SUPPLIED ACCESSORIES:
- busbar fixing
- Insulated protective caps for busbar mounting
- C.T. fixing wall mounting fixing feet
-
DVP01PT-S 4 Pt1000 Pt100 Inputs
178,35 €Pt100 and Pt1000 Celsius (°C) Fahrenheit (°F) analog module
- DVP04PT-S is able to receive 4 points of platinum temperature sensors and convert them into 16-bit digital signals.
- FROM/TO instructions in DVP Slim series MPU program, the data in DVP04PT-S can be read and written.
- There are many 16-bit control registers (CR) in DVP04PT-S. The power unit is separate from it and is small in size and easy to install.
-
Power Supply 85-264Vac/24V 48W 2A
22,93 €Caratteristiche
- UTensione di ingresso CA universale senza riduzione di potenza
- Approvazioni di sicurezza industriali e ITE
- Design robusto e compatto (Vibration 5G, Shock 30G)
- Capace di connessioni multiple a terminali
- Ampia gamma di temperature di esercizio da -20 ° C a 70 ° C
- Protezioni da sovratensione / sovracorrente / sovra temperatura / cortocircuito
-
LoRa GPS Tracker LGT-92
54,45 €Dragino LoRaWAN GPS Tracker con accellerometro 9 assi
- Base GPS tracker open source su MCU STM32L072 Ultra Low Power e modulo LoRa SX1276 / 1278.
- Include un modulo GPS a bassa potenza L70 e accelerometro a 9 assi per il rilevamento di movimento e assetto.
- L'alimentazione per il modulo GPS e l'accelerometro può essere controllata da MCU per ottenere il miglior profilo energetico per diverse applicazioni.
-
Battery 3.6 V (Li-SOCl2) AA-Size
6,41 €3,6V 2.6Ah batteria (Li-SOCl2) AA per Creatio LoraSensor THL & CO2
- Batteria di ricambio per i modelli di sensori Creatio Creatio LoRaSensor THL e CO2.
- Capacità elevata
- MAssima tensione in uscita, stabile durante la maggior parte della durata dell'applicazione
- Ampio intervallo di temperature di funzionamento (-60 ° C / + 85 ° C)
- Basso tasso di auto scarica (inferiore all'1% dopo 1 anno di conservazione a + 20 ° C)
- Facile integrazione in sistemi compatti
- Superiore resistenza alla corrosione atmosferica
-
Sensor de humedad del suelo LSE01 LoRaWAN EC
141,57 €The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture.
It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
-
LT-22222-L LoRa I/O Controller
61,71 €The Dragino LT series I/O Modules are Long Range LoRa I/O Controller.
It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and digital output etc.
-
RS485-LN RS485 / Modbus to LoRaWAN Converter
60,98 €The Dragino RS485-LN is a RS485 to LoRaWAN Converter.
It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.
-
Antena exterior de fibra de vidrio BLG-AN-040
36,30 €868 ~ 915Mhz Glass Fiber antenna designed for LoRa / LoRaWAN application.
-
LSN50v2 Waterproof Long Range Wireless LoRa...
63,16 €LSN50 LoRa Sensor Node is a Long Range LoRa Sensor Node.
It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.
-
LDDS75 LoRaWAN Distance Detection Sensor
91,48 €The Dragino LDDS75 is a LoRaWAN Distance Detection Sensor for Internet of Things solution.
It is used to measure the distance between the sensor and a flat object.
-
LDDS20 LoRaWAN Non Contact Liquid Level Sensor
84,94 €The Dragino LDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution.
It uses non contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server.
-
LSN50v2-S31 LoRaWAN Temperature & Humidity Sensor
74,05 €LoRaWAN Temperature & Humidity Sensor
- It is a sensor that is used to measure temperature and humidity with high precision.
- It has a selection of alarm for temperature and humidity from the value assigned to transmit the alarm.
- the sensor used is a sensirion SHT31 that is calibrated linearized, etc. With which it provides high precision and stability over time.
-
BCN01 Bluetooth BLE iBeacon
18,88 €Bluetooth BLE iBeacon
The BCN01 is a Bluetooth BLE iBeacon designed for indoor positioning solution and has very low power consumption.