Inizio

Frer NaNo5 with 3 standard CTs inputs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

Frer NaNo63H with triple miniature CTs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

MPU points: 14 (8DI + 6DO)

• Max. I/O points: 494 (14 + 480)
• Program capacity: 8k steps
• COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
• High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
• Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
• Built-in High-Speed Counters 

Open source singolo canale LoRa Gateway.

• Consente di collegare la rete wireless LoRa a una rete IP tramite WiFi, Ethernet, 3G o 4G cellulare.
• LoRa wireless consente agli utenti di inviare dati e raggiungere distanze estremamente lunghe a velocità di trasmissione dati basse.
• Fornisce una comunicazione a spettro esteso a raggio ultra-lungo e un'elevata immunità alle interferenze.

Frer NaNo63H with triple miniature CTs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

MPU points: 14 (8DI + 6DO)

• Max. I/O points: 494 (14 + 480)
• Program capacity: 8k steps
• COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
• High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
• Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
• Built-in High-Speed Counters 

Digital I/O Expansion

• 4 Digital inputs 24Vdc
• 4 Single Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC

FRER C70QTL005MCAD 6A three phase 4 wire energy counter

LoRa GPS Shield per Arduino

• Scheda di espansione di LoRa ™ / GPS per l'uso con Arduino.
• Soluzione rapida per chi è interessato a sviluppare soluzioni LoRa ™ / GPS.

FRER C70QTL005MCAD 6A three phase 4 wire energy counter

Frer Split-core Measuring CT TAA031 series

• 32x21 windows cable pass thruogh
• from 100A up to 400A

SUPPLIED ACCESSORIES:

• busbar fixing
• Insulated protective caps for busbar mounting
• C.T. fixing wall mounting fixing feet

LoRa Shield per Arduino

• Scheda di espansione di LoRa ™ da utilizzare con Arduino.
• Soluzione rapida per chi è interessato a sviluppare soluzioni LoRa ™.

Frer Split-core Measuring CT TAA081 series

• 50x81 windows cable pass thruogh
• from 250A up to 1000A

SUPPLIED ACCESSORIES:

• busbar fixing
• Insulated protective caps for busbar mounting
• C.T. fixing wall mounting fixing feet

LoRa GPS HAT

• Modulo di espansione per LoRaWan e GPS per l'utilizzo con Raspberry Pi
• Soluzioni veloci per lo sviluppo di soluzioni LoRaWAN.

Thermocouple Celsius (°C) Fahrenheit (°F) analog module

• receive 4 points of external thermocouple temperature sensors and convert them into 14-point digital signals.
• FROM/TO instructions in DVP Slim series MPU program, the data in the module can be read and written.
• There are many 16-bit control registers (CR) in DVP04TC-S.
• The power unit is separate from it and is small in size and easy to install.

Open source singolo canale LoRa Gateway.

• Consente di collegare la rete wireless LoRa a una rete IP tramite WiFi, Ethernet, 3G o 4G cellulare.
• LoRa wireless consente agli utenti di inviare dati e raggiungere distanze estremamente lunghe a velocità di trasmissione dati basse.
• Fornisce una comunicazione a spettro esteso a raggio ultra-lungo e un'elevata immunità alle interferenze.

Specifiche

• 4.3”(480*272) 65,536 Colors TFT
• Cortex-A8 800MHz CPU
• 512 MB RAM 256 MB ROM
• Built-in Ethernet
• 1 COM port / 1 extension COM port
• Multilingual input
• USB Hos , USB Client
• CE / UL certified
• Operating Temperature: -20°C ~ 60°C

Dragino LoRaWAN GPS Tracker con accellerometro 9 assi

• Base GPS tracker open source su MCU STM32L072 Ultra Low Power e modulo LoRa SX1276 / 1278.
• Include un modulo GPS a bassa potenza L70 e accelerometro a 9 assi per il rilevamento di movimento e assetto.
• L'alimentazione per il modulo GPS e l'accelerometro può essere controllata da MCU per ottenere il miglior profilo energetico per diverse applicazioni.

QE-ETH485 multiclient bridge Modbus RTU to Modbus TCP

• Alimentazione 24Vdc-Ac
• Modulo da 17,5mm per montaggio su guida DIN
• Ethernet 10Base-T / 100Base-T
• Isolato tra seriale RS485, alimentatore e Ethernet
• Connessione T-BUS per installazione veloce senza cablaggio
• Fino a 10 connessioni client
• Configurazione Web

3,6V 2.6Ah batteria (Li-SOCl2) AA per Creatio LoraSensor THL & CO2

• Batteria di ricambio per i modelli di sensori Creatio Creatio LoRaSensor THL e CO2.
• Capacità elevata
• MAssima tensione in uscita, stabile durante la maggior parte della durata dell'applicazione
• Ampio intervallo di temperature di funzionamento (-60 ° C / + 85 ° C)
• Basso tasso di auto scarica (inferiore all'1% dopo 1 anno di conservazione a + 20 ° C)
• Facile integrazione in sistemi compatti
• Superiore resistenza alla corrosione atmosferica

Open source LoRa  Gateway fully compatible with LoRaWAN protocol

• Bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
• Allows users to send data and reach extremely long ranges at low data-rates.
• Fully compatible with LoRaWAN protocol.
• Includes a SX1308 LoRa concentrator and a SX1276 LoRa tranceiver,
• 10 programmable parallel demodulation paths and the SX1276 acts as TX channel so the SX1308 won’t be block during TX. This combination provides higher capacity compare with a standalone SX1308 concentrator solution.