Inizio

Frer NaNo5 with 3 standard CTs inputs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

Frer NaNo63H with triple miniature CTs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

MPU points: 14 (8DI + 6DO)

• Max. I/O points: 494 (14 + 480)
• Program capacity: 8k steps
• COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
• High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
• Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
• Built-in High-Speed Counters 

Frer NaNo63H with triple miniature CTs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• Two versions with direct current input 63 and 125A supplied with triple miniature CTs have been introduced, alongside the version with the CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

MPU points: 14 (8DI + 6DO)

• Max. I/O points: 494 (14 + 480)
• Program capacity: 8k steps
• COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
• High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
• Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
• Built-in High-Speed Counters 

Frer NaNo5 with 3 standard CTs inputs

• Multifunction meter , suitable for three-phase three or four wires systems unbalanced load, even with distorted wave-forms.
• Displays of the main electrical measurements of an electrical network, including active and reactive energy coun-ting.
• CT input, to reduce cost and wiring time.
• Thanks to its small size and compatibility with spacings of modular switches, the miniature CTs can be mounted in a very small spaces conditions, both upstream and downstream of the 'switch as shown in the pictures

Digital I/O Expansion

• 4 Digital inputs 24Vdc
• 4 Single Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC

FRER C70QTL005MCAD 6A three phase 4 wire energy counter

Digital I/O Expansion

• 8 Digital inputs 24Vdc
• 8 Relay output 1.5A/1 point (5A/COM) < 250VAC, 30VDC

FRER C70QTL005MCAD 6A three phase 4 wire energy counter

Analog Expansion

• Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
• Analog input channel 4 channel/each module
• Analog input range ±10V ±20mA
• Digital conversion range ±8,000 ±4,000
• Resolution 14 bits (1LSB=1.25mV) 13 bits (1LSB=5µA)
• Input impedance > 200K 250
• Overall accuracy ±0.5% of full scale of 25°C (77°F). ±1% of full scale during 0 ~ 55°C (32 ~ 131°F)
• Response time 3ms × channels

Frer Split-core Measuring CT TAA031 series

• 32x21 windows cable pass thruogh
• from 100A up to 400A

SUPPLIED ACCESSORIES:

• busbar fixing
• Insulated protective caps for busbar mounting
• C.T. fixing wall mounting fixing feet

Analog Expansion

• Power supply voltage 24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
• Analog output channel 4 channel/each module
• Analog ouput range 0..10V 0..20mA
• Digital conversion range 4,000
• Resolution 12 bits (1LSB=2.5mV) 13 bits (1LSB=5µA)
• Response time 3ms × channels
• Max. output current 20mA (1K ~ 2M)

Frer Split-core Measuring CT TAA081 series

• 50x81 windows cable pass thruogh
• from 250A up to 1000A

SUPPLIED ACCESSORIES:

• busbar fixing
• Insulated protective caps for busbar mounting
• C.T. fixing wall mounting fixing feet

Pt100 and Pt1000 Celsius (°C) Fahrenheit (°F) analog module

• DVP04PT-S is able to receive 4 points of platinum temperature sensors and convert them into 16-bit digital signals.
• FROM/TO instructions in DVP Slim series MPU program, the data in DVP04PT-S can be read and written.
• There are many 16-bit control registers (CR) in DVP04PT-S. The power unit is separate from it and is small in size and easy to install.

Thermocouple Celsius (°C) Fahrenheit (°F) analog module

• receive 4 points of external thermocouple temperature sensors and convert them into 14-point digital signals.
• FROM/TO instructions in DVP Slim series MPU program, the data in the module can be read and written.
• There are many 16-bit control registers (CR) in DVP04TC-S.
• The power unit is separate from it and is small in size and easy to install.

Caratteristiche

• UTensione di ingresso CA universale senza riduzione di potenza
• Approvazioni di sicurezza industriali e ITE
• Design robusto e compatto (Vibration 5G, Shock 30G)
• Capace di connessioni multiple a terminali
• Ampia gamma di temperature di esercizio da -20 ° C a 70 ° C
• Protezioni da sovratensione / sovracorrente / sovra temperatura / cortocircuito

Specifiche

• 4.3”(480*272) 65,536 Colors TFT
• Cortex-A8 800MHz CPU
• 512 MB RAM 256 MB ROM
• Built-in Ethernet
• 1 COM port / 1 extension COM port
• Multilingual input
• USB Hos , USB Client
• CE / UL certified
• Operating Temperature: -20°C ~ 60°C