LoRa Nodes

LoRa GPS Shield for Arduino

• Expansion board of LoRa™/GPS for use with the Arduino.
• Fast kit solution for those interested in developing LoRa™/GPS solutions.

LoRa Shield for Arduino

• Expansion board of LoRa™ for use with the Arduino.
• Fast kit solution for those interested in developing LoRa™ solutions.

LoRa GPS HAT

• Expansion module for LoRaWan and GPS for use with the Raspberry Pi
• Fast solutions for  developing LoRaWAN solutions.

LoRaST IoT module featuring LoRa® technology 

• small wireless transceiver module
• offers a very compelling mix of long range, low power consumption and secure data transmission.
• Designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions.
• Help users to turn the idea into a practical application and make the Internet of Things a reality.
• It is easy to program, create and connect your things everywhere. 
• M2 format E-Key connector

The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture.

It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.

The Dragino LT series I/O Modules are Long Range LoRa I/O Controller.

It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and digital output etc.

The Dragino RS485-LN is a RS485 to LoRaWAN Converter.

It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.

LSN50 LoRa Sensor Node is a Long Range LoRa Sensor Node.

It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.

• The Dragino LDDS75 is used to measure the distance between the sensor and a flat object
• It is a module that uses ultrasonic technology to measure distances.
• It can be used in different situations such as silos of food products, proximity of objects, etc...

The Dragino LDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution.

It uses non contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server.

RS485/UART to LoRaWAN Converter

• Wireless Alarm and Security Systems
• Automated Meter Reading
• Long range Irrigation Systems, etc.
• Home and Building Automation
• Industrial Monitoring and Control

LoRaWAN Waterproof Temperature Sensor

• The LSNv2-D20 sensor is a chip that can measure temperatures between 55 ° C ~ 125 ° C.
• Domestic Heat Water Systems
• Heating & Cooling Systems
• The cable is made of a silica gel that has a double compression to make it watertight, moisture ...

LoRaWAN Temperature & Humidity Sensor

• It is a sensor that is used to measure temperature and humidity with high precision.
• It has a selection of alarm for temperature and humidity from the value assigned to transmit the alarm.
• the sensor used is a sensirion SHT31 that is calibrated linearized, etc. With which it provides high precision and stability over time.

Bluetooth BLE iBeacon

The BCN01 is a Bluetooth BLE iBeacon designed for indoor positioning solution and has very low power consumption.

• The Dragino LWL02 is a LoRaWAN water sensor.
• When there is water between the two metal probes, LWL02 indicates a water leak event.
• LWL02 sends data periodically every day.

• Dragino LAQ4 is a LoRaWAN air quality sensor for Internet of Things solution. It is designed to measure the surrounding environment parameters include: TVOC(Total Volatile Organic Compound), eCO2(equivalent CO2), Temperature and Relative Air Humidity, and then upload to IoT server via LoRaWAN wireless protocol.
• LAQ4 supports temperature and humidity alarm feature, user can get alarm for instant notice.
• LAQ4 supports Datalog feature, User can retrieve the sensor data from LoRaWAN commands.

• The Dragino LDS02 is a door sensor.
• Detects the open/closed door status.
• The user can see the status of the door, the opening time.

• The Dragino LSNPK01 is a LoRaWAN soil NPK sensor for agricultural IoT.
• It is designed to measure soil fertility nutrient and provide a plant breeding reference.
• The probe is IP68 waterproof and can be buried in the ground for long time use.

• The Dragino LSPH01 is a soil pH sensor for agriculture.
• It is designed to measure the pH and temperature of the soil and analyze the level of acid or alkalinity.
• The LSPH01 probe is made with a solid AgCI reference electrode and a pure metal pH sensitive electrode.

• It is capable of measuring the distance to an object as close as 10 centimeters.
• The LiDAR probe uses laser induction technology for distance measurement.
• It can be applied to scenarios such as horizontal distance measurement, parking lot management, dumpster management, etc.

• Measure the surrounding ambient temperature and relative humidity of the air accurately.
• It is fully calibrated, linearized and with a Sensirión temperature compensated digital output.
• The SHT31 is fixed in a waterproof anti-condensation casing for long-term use.

• It is used to measure the distance between the sensor and a flat object.
• The distance sensing sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve data reliability.
• Unlike the LDDS04 this sensor can only measure one distance.

• Temperature sensor to measure the temperature of air, liquid or object.
• It has two wires that are waterproof, moisture-proof and anti-rust for long-term use.
• Support temperature alarm function, user can set the alarm for instant notice.

• Temperature sensor can be used to measure the temperature of air, liquid or object.
• Supports temperature alarm function, you can set it for instant warning in case of going out of the set range.
• It has two sensors that are waterproof, moisture-proof and anti-rust for long-term use.

• It is capable to support up to four Ultrasonic Sensors to measure four distances at the same time.
• Different types of probes can be used together.
  
• It can be applied in different situations such as long-range irrigation system, etc...

• The LSD03A is more robust and resistant to outdoor use.
• It has a Li-SOCI2 8500 mAh battery.
• It has the function of open alarm and you can set this option to know if the door has been open in a certain time.

• It detects open/close status and uplinks to IoT server via LoRaWAN network.
• The CPL01 will send periodically data every day as well as for each dry contact action.
• It also count the contact open times and calculates the last open duration.

• It is the main processing unit for a weather station.
• Read values from various sensors and transmit the data to an IoT server
• It is an outdoor RS485 LoRaWAN end node